The Mark 7® Revolution®
Call 1-888-4MARK77 (1-888-462-7577) to speak with a Mark 7 Sales Specialist to help build the perfect commercial package to meet your loading needs.
Looking for a top quality, commercial grade loading machine at an affordable price? The Revolution press is the one for you! Whether you are loading tens of thousands of rounds of ammunition or processing brass for resale, the ten station Revolution has you covered.
Base Price Starts at $10,500
The Revolution is available in calibers from 380 Auto up to 308 Win and can produce up to 3500 rounds per hour at maximum speed. The press comes complete with an Onboard Collated Priming System, a 14" Case Feeder, a Digital Powder Measure, and a Mr. Bullet Feeder Pro. The Revolution is already equipped with JamSense and TorqueSense, and the rest of our full array of sensors can be easily integrated to warn you of any potential problems at each step of the loading process before they can cause damage or downtime.
3,500 Rounds Per Hour
Compatible with Mark 7® Autodrive & Accesories
Onboard Primer Collator for Continuous Feed Operation
Microprocessor Monitored & Controlled
Works on New and Re-Manufactured Brass
Smooth & Precise Gear-Based Movement & Shell Plate Indexing
Top of the line automated ammunition loading platform
Looking for a top quality, commercial grade loading machine at an affordable price? The Revolution® press is the one for you! Whether you are loading tens of thousands of rounds of ammunition or processing brass for resale, the ten station Revolution® press has you covered. Its compact design takes up a minimal amount of shop space yet produces quality ammunition rivaling machines costing many times as much. The press features a completely integrated press and drive mechanism that is fully automated with digital and computer control. Our full array of integrated sensors warns you of any potential problems before they can cause damage to the machine and costly downtime.
The Revolution® can work with most off-the-shelf reloading dies and supports a variety of accessories.We recommend the Lyman Pro Line Dies that are specifically designed for Mark 7® presses. Super smooth operation, rugged design and cutting-edge technology combine to make this the press for your commercial loading business.
Base Price Starts at $10,500
International Customers: Please note that due to ITAR regulations, the Revolution® cannot be sold internationally. Please check out the Evolution Commercial press for international sales.
Add Some
Magic
Mark 7® Sensors are truely the "Magic in the Machine."
Our famous Mark 7® Sensors allow for precise press performance. When you add a sensor to your order, it will be installed onto your Revolution® press and ready upon arrival.
Must Have
Gear
The official Mark 7® Accessories built for your Revolution®
Standard Features
-
Completely integrated reloading press and drive mechanism - fully automated, digital, and computer controlled
-
Hardened alloy steel and anodized aluminum construction
-
Onboard primer collator
-
Ultra smooth and precise, gear-based machine movement and shell plate indexing
-
Mark 7® sensors can be easily integrated
-
Up-to 3500 rounds per hour
-
10 station toolhead utilizing off-the-shelf reloading dies
-
Microprocessor monitored and controlled
-
Features monitored by computer
-
System works on new AND remanufactured brass
-
Downloadable machine firmware and software upgrades for life
-
Supports a variety of accessories including today’s off-the-shelf reloading dies
-
Pre-assembled and shipped ready-to-use
-
CNC grade planetary gearbox
-
Full 1 year warranty
Standard Equipment
- 14” Case Feeder
- Bullet Feeder Pro
- Digital Powder Measure
- Onboard Collated Priming
- Ultra smooth, precise, gear-based machine movement and shell plate indexing
- Supports one-pass rifle/pistol processing and loading
- Works on new AND used brass
- Precision CNC machined aluminum and steel
- Compatible with Mark 7® sensors and accessories
- Fully supported Mark 7® community and technical help included
Available Calibers
- 9mm/.38 Super (#101-1176-01)
- 40 S&W (#101-1176-02)
- 38 Special /.357 Mag (#101-1176-03)
- 45 ACP (Large Primer) (#101-1176-04)
- 223 Remington (#101-1176-05)
- 308 Winchester (#101-1176-06)
- 38 Super Comp (#101-1176-07)
- 380 ACP (#101-1176-08)
- 10mm (#101-1176-09)
- 45 ACP (Small Primer) (#101-1176-10)
- 458 SOCOM (#101-1176-11)
- 44 Magnum /.45 Long Colt (#101-1176-12)
- 7.62 x 54R (#101-1176-13)
- 7.62x 39 (#101-1176-14)
- 300 AAC (#101-1176-15)
- 6.5 Creedmoor (#101-1176-16)
| SKU | 101-1176 |
|---|---|
| Number of Die Stations | 10 |
| Caliber Range | 380 Auto to 308 Win |
| Rounds per Hour | Up to 3500 |
| Drive System | Direct Gear Drive |
| Priming System | Onboard Primer Collator |
| Type of Case Feeder | 14" metal construction, up to 5800 rph |
| Type of Powder Measure | Digitally Controlled |
| Bullet Feeder | Mr. Bullet Feeder Pro |
| Digitally Controlled | Yes, microprocessor monitored and controlled |
| Sensors Included | Torque and Jam Sense (additional sensors optional) |
| Machine Weight | ~100 lbs. |
| Dimensions | 28" x 15" x 45" |
Contact our sales team
Considering a Mark 7®? We are always ready to help! We are experts in everything from financing your press, selecting the best press for your needs, and the necessary equipment to get the most from it.
1-888-4MARK77
Our Support Options
We are proud of our hallmark multichannel customer service and support operation. Please help us keep costs (and prices) as low as possible by selecting the option below that most closely meets your needs. If it is important for you to call us please do so at 1-888-4-MARK-77 (1-888-462-7577). The Customer Service Call Center is available between the hours of 9:00am and 4:30pm Eastern Time but please consider the available options below:
No special tools are needed, but a good Allen wrench set is recommended. It will take about an 1 hour to 90 minutes to get the press set up* meaning the press is physically set up but not ready to load on: that will take another 1 to 2 hours. The necessary steps are:
- Install the sensors
- Set up and adjust the bullet feeder and case feeder
- Set dies
- Set the sensors
- Set powder measure charge, etc...
In all, you should expect to spend 3+ hours to install the press and all sensors.
The ease and time required to change calibers depends on both your primer size and level of experience. Small calibers can take as little as 30 minutes or less with all necessary accessories. Small to large caliber or large to small caliber changes could take up to an hour depending on the number of pieces changed.