Evolution™ + Autodrive

Out of stock
$4,994.95
SKU
101-1047-02

This press has been replaced by the new Apex 10 press. Existing orders will still be honored and we will continue to provide support for all Evolution™ + Autodrives.

The Evolution™ + Autodrive has all of the precision and power of the Evolution™, automated!  It offers smooth ambidextrous hand operation on the left or right side of the press with an included ergonomic handle designed by a medical device engineer.

*Price above includes 11" Casefeeder, Mechanical Powder Measure, Standard Priming, and Autodrive.

Up to 3500 Rounds per Hour

Compatible with Mark 7® Autodrive & Accesories

Standard Priming System for Continuous Feed Operation

Case Feeder Included

Calibers from .380 up-to .308 Winchester

Mechanical Powder Measure

Watch the Evolution™ in Action

Smooth and precise, easy to use, and exactly what you are looking for.  The manual Evolution™ press is shown in the video.

AutodriveWShadowTrans

POWER

Installed

90% MORE BULLETS   |   100% EASIER TO USE

Your new Evolution™ will come with a Mark 7® Autodrive to automate your reloading and allow for speeds up to 3500 rounds per hour!  The combination of our patented digital sensor technology, torque sensing motor, and jam sense technology ensures a safe and trouble-free loading experience.

Pre-Assembled & Ready-to-Use

The Evolution™ + Autodrive is ready to use as soon as it arrives.  Mark 7® will custom-build your machine plus any sensors and accessories you have purchased.

Add Some

Magic

Mark 7® Sensors are truely the "Magic in the Machine." 

Our famous Mark 7® Sensors allow for precise press performance.  When you add a sensor to your order, it will be installed onto your Evolution™ + Autodrive press and ready upon arrival.

Must Have

Gear

The official Mark 7® Accessories built for your Evolution™ + Autodrive

More Information
SKU101-1047-02
Number of Die Stations10
Caliber Range380 Auto to 308 Win
Rounds per HourUp to 3500
Drive SystemBelt Drive
Priming SystemStacked Priming (std.)
Type of Case Feeder11" polymer construction, 500 rph (std.)
Type of Powder MeasureCase Activated Mechanical (std.)
Bullet FeederMr. Bullet Feeder Pro
Digitally ControlledYes, microprocessor monitored and controlled
Sensors IncludedTorque and Jam Sense, Low Primers (additional sensors optional)
Machine Weight~100 lbs.
Dimensions28" x 15" x 45"
Write Your Own Review
Write a ReviewEvolution™ + Autodrive

Contact our sales team

web_teamcopy2

Considering a Mark 7®?  Sydney and Joe are always ready to help!  They are experts in everything from financing your press, selecting the best press for your needs, and the necessary equipment to get the most from it. 

1-888-4MARK77

Our Support Options

We are proud of our hallmark multichannel customer service and support operation. Please help us keep costs (and prices) as low as possible by selecting the option below that most closely meets your needs.  If it is important for you to call us please do so at 1-888-4-MARK-77 (1-888-462-7577).  The Customer Service Call Center is available between the hours of 9:00am and 4:30pm Eastern Time but please consider the available options below:

  • Tool head size: The Dillon presses have 5 where the Evolution™ has 10.
  • The Evolution™ has CNC and Billet construction.
  • The Evolution™ is easier to automate and works better when automated: Dillon presses were not made to be automated.
  • The Evolution™ offers more sensor options if you choose to automate.

Yes, when used with an Evolution™ Autodrive.

The ease and time required to change calibers depends on both your primer size and level of experience.  Small calibers can take as little as 30 minutes or less with all necessary accessories. Small to large caliber or large to small caliber changes could take up to an hour depending on the number of pieces changed.

No special tools are needed, but a good Allen wrench set is recommended. It will take about an 1 hour to 90 minutes to get the press set up* meaning the press is physically set up but not ready to load on: that will take another 1 to 2 hours. The necessary step are:

  1. Install the sensors
  2. Set up and adjust the bullet feeder and case feeder
  3. Set dies
  4. Set the sensors
  5. Set powder measure charge, etc...

In all, you should expect to spend approximately 90 minutes to set up a manual press, or approximately 3 or more hours for an automated press with sensors.

Yes, provided that they are standard thread dies.

Very easy: Simply install your Evolution™ Autodrive which typically requires 30 - 45 minutes on average.

The Evolution™ Previous The Evolution™
To Top