Questions ? Call us at 1-888-4MARK77 (1-888-462-7577)

Evolution

Grid List

Set Descending Direction

7 Item(s)

  1. The Evolution™

    $2,424.95

    Price point starting with an all-new, 10-stage consumer, manual reloading machine compatible with these features:

    • Smooth ambidextrous hand operation- left or right side with the included ergonomic handle designed by medical device engineer
    • Priming System
    • Mechanical powder measure
    • Case Feeder
    • Loading dies
    • BulletFeeder
    • Supports our one-pass processing and loading
    • Calibers from .380 up-to .30-06

      Dimensions
    • Overall machine dimensions are 37" tall (94cm) X 27" (68.6cm) wide x 18" (45.7cm) deep
    • Machine weight 65lbs (29.5kg)
    • Ships assembled on a sturdy aluminum base which is designed to be bolted into your workbench or placed on the Evolution™ Autodrive baseplate
    • Shipping box dimensions are: 26"x16"x32", 70 lbs
    * Pictured with optional accessories, everything is not included 
    Get more information and see videos of the Evolution in action at the Mark 7® Digital Community.
    Learn More
  2. Mark 7® PowderCheck

    $249.95

    The Mark 7® Digital PowderCheck® Sensor can automatically stops the machine if a grossly incorrect powder level is detected inside the case.

    Compatible with the following Mark 7® Loading Machines & Autodrives

    - Evolution® + Autodrive

    - Evolution

    - RL1100/CP2000/Super1050/1050X Autodrives

    - 650 Pro/650 X Autodrives

    Learn More
  3. Evolution® + Autodrive Package Builder

    $2,424.95
    *Price point listed above does not include available additional features 
    *Package Builder has savings built-in so it can not be combined with our Veteran/Military Discount or Promotions
    *If you are looking to make an international purchase, please contact our office and a sales representative will assist you. Package builders are set up for domestic purchases only.*
    (888)462-7577

    This package builder is the easiest way to get products from Mark 7®.  There is quite a bit of logic built into this system so please see these instructions to ensure you have a smooth experience.  There are 7 steps below and as you start from Step #1, different options will become available based upon the system you select:

    • Step 1 - Please select your Mark 7 Evolution® + Autodrive CORE system - which would be either processing, loading with stacked primers, or loading with the onboard automatic primer collator
    • Step 2 - Here you will select the caliber of your setup 
    • Step 2.5 - You have the option to select our Ultimate die pack for your machine - becomes visible as you progress through the system
    • Step 3 - Here you have two options for case feeders - so you can select the best option or you
    • Step 4 - We have two bullet feeder options that you can select from
    • Step 5 - Here you will be able to select the best powder measure for your purposes 
    • Step 6  - Choose your desired sensors
    • Step 7 - Select from our growing accessory options
    Typically custom configurations ship within 30 days, off-the-shelf configurations (when in stock) ship within 72 hours
    Learn More
  4. Mark 7® Optimized Die Pack

    $0.00
    Thousands of customers have Mark 7® machines and their feedback is awesome ! They have told us that this configuration is optimal for our machines. We have assembled a die pack for for each of the calibers supported by our machines. They vary somewhat by caliber, particularly when you get into the more boutique rifle calibers. Dress up your loading machine with the preferred set of dies ! Learn More
  5. Evolution® Package Builder

    From: $2,424.95

    To: $4,549.95

    *Package Builder has savings built-in so it can not be combined with our Veteran/Military Discount or Promotions
    *If you are looking to make an international purchase, please contact our office and a sales representative will assist you. Package builders are set up for domestic purchases only.*
    (888)462-7577

    Evolution Ships to Consumers in May, 2018

    This package builder is the best way to get products from Mark 7®.  There is quite a bit of logic built into this system so please see these instructions to ensure you have a smooth experience.  There are 10 steps below and as you start from Step #1, different options will become available based upon the system you select:

    • Step 1 - Please select your Mark 7® Evolution™ manual base loading press from the drop-down box (the manual press includes a case feeder and Mr. Bullet Feeder)
    • Step 2 - You have the option to select a caliber conversion kit for the option above.  You can leave the option displayed as "Step 2" if you do not want a caliber conversion kit 
    • Step 3 - You have the option to select a primer conversion kit for the option above.  You can leave the option displayed as "Step 3" if you do not want a caliber conversion kit
    • Step 4 - You can select a Trimmer Kit in this option if you are processing rifle brass
    • Step 5 - By selecting this option you will be getting an Evolution™ PRO upgrade and the options for digital sensors will become available
    • Step 6 - You can select your digital sensors from this list - SwageSense™is included with the Evolution™ PRO so it is not available as a sensor as its already included
    If you have any issues with the remaining steps please feel free to call us anytime !

    Shipping begins in May, 2018 to dealer inventory then to consumer orders

    Learn More

Grid List

Set Descending Direction

7 Item(s)

Newsletter
Sign up and stay up to date on the latest news and innovations coming from Mark 7®