APEX 10®

In stock

The Apex 10™ manual press operates so smoothly you might think it is an automated press!  It features a solid cast 10-station toolhead to enable one-pass loading, our all-new Mark 7 Case Feeder, a Mechanical Powder Measure, our new, shuttle-disk priming system, ambidextrous operation, and so much more.

Please note: If you are adding dies to your order, the Apex 10 already includes a Universal Hold Down Die so the dropdown menus below offer you options for a Lyman Pro Die Set (qty 4 dies). This includes 1 Combo Decap/Size, 1 Seat, 1 Crimp Die plus a M-Die Neck Expander Die for Rifle Sets or a Flare Die for Pistol Sets. The next dropdown offers a Universal Decapping Die so that you can use the Combo Decap/Size die as a priming station hold down with the decap stem removed for additional case stability during priming. We especially recommend this setup for automated machines, but is not necessary for manual loading.


Additional options and upgrades are available in the sliders below.

Compatible with Mark 7® Autodrive™ & Accesories

Shuttle Disk Priming System for Continuous Feed Operation

Supports our One-Pass Processing and Loading

Works on New and Re-Manufactured Brass

Calibers from .380 up-to .308 Winchester

Smooth & Precise Gear-Based Movement & Shell Plate Indexing

10 Station Manual Loading Machine

Our APEX 10® reloading press is a commercial grade loading press that has been modified to meet the needs of high volume reloaders. With its 10-die station design, the APEX 10® gives you more flexibility and options than any of the competition! The precision CNC machined construction and super smooth operation says “quality” every time the handle is cycled. In addition, the press can be upgraded for fully automatic operation with our Autodrive™ system and digital controls, as well as our wide array of sensors. The APEX 10® can work with most off-the-shelf reloading dies and supports a variety of accessories. The manual APEX 10® can produce up to 1200 rounds per hour making it the perfect choice for competitive shooters looking to quickly make large quantities of top-quality ammo.

Designed for automation, and for many optional upgrades, which include the Mark 7® Primer Express, the Mark 7® APEX 10® Autodrive™ and the complete suite of Mark 7® Sensors and parts.
If you own a Mark 7® 1050 Pro/X Autodrive™, it can be modified for use on a APEX 10® with the purchase of a conversion kit.

This product is available in both 110V and 220V

Add Some


Mark 7® Sensors are truely the "Magic in the Machine." 

Our famous Mark 7® Sensors allow for precise press performance. 

Must Have


The official Mark 7® Accessories built for your APEX 10®

Watch the APEX 10® in Action

Smooth and precise, easy to use, and exactly what you are looking for.

Standard Features

A massive, robust 10-station tool head which allows you to “have it all”

Station 1: Case feeding
Station 2: Sizing and decapping
Station 3: Swage/Case trim
Station 4: Primer seat with hold down
Station 5: Case flare/neck expansion
Station 6: Powder drop
Station 7: Powder check
Station 8: Bullet Dropper
Station 9: Seating
Station 10: Crimping

*The above is just one possible set-up. The 10 station tool head offers a large variety of options for all your reloading and case processing needs.

  • Large capacity, fast feeding case collator
  • Ergonomically designed operating handle, which can be assembled for right or left-hand use
  • 11” Case Feeder with a new and improved case feed system using roller bearings and user-adjustable springs
  • Mechanical Powder Measure
  • Shuttle Disk Stacked Priming System
  • Supports one-pass rifle/pistol processing and loading
  • Works with new AND fired brass
  • Precision CNC machined aluminum and steel
  • Upgradeable with Mark 7® Autodrives and sensors
  • Fully supported Mark 7® community and technical help included
  • Double Guide Rod support for the tool head creates smoother more in-line function
  • Gear-based precision-fit overall operation
  • A large assortment of accessories, upgrades and sensors are available - see accessories and sensors below.


The APEX 10® can easily be upgraded with the following options at any point:

PLEASE NOTE: Dies and Bullet Feeder are not included with the APEX 10® and must be purchased separately.

Available Calibers

9mm/.38 Super (#101-1260-01-01)
40 S&W (#101-1260-02-01)
38 Special /.357 Mag (#101-1260-03-01)
45 ACP (Large Primer) (#101-1260-04-01)
223 Remington (#101-1260-05-01)
308 Winchester (#101-1260-06-01)
38 Super Comp (#101-1260-07-01)
380 ACP (#101-1260-08-01)
10mm (#101-1260-09-01)
44 Magnum /.45 Long Colt (#101-1260-11-01)
6.5 Creedmoor (#101-1260-13-01)


Ready To

Power Up?


Adding a Mark 7® Autodrive to your new APEX 10® automates your reloading and allows for speeds up to 3500 rounds per hour!  The combination of our patented digital sensor technology, torque sensing motor, and JamSense™ technology ensures a safe and trouble-free loading experience.

More Information
Number of Die Stations10
Caliber Range 380 up to .308
Drive SystemManual
Priming SystemShuttle Disk Stacked Priming System
Type of Case Feeder11" High Speed Case Feeder
Type of Powder MeasureMechanical Powder Measure
Machine Weight60 lbs
Dimensions18" Tall, 15" Wide, 11" Deep
Write Your Own Review
Write a ReviewAPEX 10®

Contact our sales team


Considering a Mark 7®?  We are always ready to help!  We are experts in everything from financing your press, selecting the best press for your needs, and the necessary equipment to get the most from it. 


Our Support Options

We are proud of our hallmark multichannel customer service and support operation. Please help us keep costs (and prices) as low as possible by selecting the option below that most closely meets your needs.  If it is important for you to call us please do so at 1-888-4-MARK-77 (1-888-462-7577).  The Customer Service Call Center is available between the hours of 9:00am and 4:30pm Eastern Time but please consider the available options below:

The Mark 7® Evolution™ Commercial Previous The Mark 7® Evolution™ Commercial
To Top