Primer Orientation Sensor

Available to Order
$324.95
SKU
101-1040

AVAILABLE NOW! While loading on a Mark 7® Evolution™ or Revolution®, you now have the ability to stop the machine if you have a primer that is missing or have other issues inserting a primer. Have you had the situation where you are loading at a pretty good pace only to find out that your supply contains nonconforming or missing primers? This can create havoc on your supply and loading operation - and in general is a headache. Well, we have a solution! 

This sensor is only available for the Evolution™ and Revolution® class of machines that have priming systems in them (not brass processors). Regardless if you're set up in Stacked Priming or with the Onboard Primer Collator, this sensor slides right into the cut-out near your primer punch.

There are two specific functions of this sensor:

  • Can stop your Evolution™ or Revolution® in the event of a missing, upside down, cocked, or a primer that is too proud
  • Can stop your machine if you have a jam and the machine does not index properly
    • Both of these functions enable an alert on your tablet screen that the sensor has been activated

    How does it work? You set the level of the primer probe at the side of the sensor so that the indication level is custom to your needs. Cartridges slide across the probe, and if they meet the level that you set, the machine will continue to operate, and if not the machine can stop. The indexing sensor component of this unit works independently and senses the shell plate rotation. The programming on the machine is designed to alert the user when the machine has made a stroke, but the shell plate has not indexed or rotated. This sensor helps increase the utility of your machines by streamlining the overall loading process.


    More Information
    SKU101-1040
    Write Your Own Review
    Write a ReviewPrimer Orientation Sensor

    Contact our sales team

    web_teamcopy2

    Considering a Mark 7®?  Sydney and Joe are always ready to help!  They are experts in everything from financing your press, selecting the best press for your needs, and the necessary equipment to get the most from it. 

    1-888-4MARK77

    Our Support Options

    We are proud of our hallmark multichannel customer service and support operation. Please help us keep costs (and prices) as low as possible by selecting the option below that most closely meets your needs.  If it is important for you to call us please do so at 1-888-4-MARK-77 (1-888-462-7577).  The Customer Service Call Center is available between the hours of 9:00am and 4:30pm Eastern Time but please consider the available options below:

    Mark 7® 1050 Safety Shield with Electronic Disconnect Previous Mark 7® 1050 Safety Shield with Electronic Disconnect
    To Top