Bullets are placed on
top of your case through the Mr BulletFeeder® bullet feeder
dropper. Then the shell plate indexes. If your case is not flared
or belled properly your bullet may fall off, go sideways or otherwise not
be properly aligned for bullet seating.
BulletSense® is the first electronic
detection system that can stop your machine before any of the situations above
impact your loading process -- and it also acts as a brass sensor.
We've created a laser mounted system on
a user-adjustable slider that allows you to point the laser right where you
want it - at the tip of the bullet or directly on the brass. If the laser
beam is interrupted every time your machine makes a stroke, the machine
continues ( i.e. if a bullet head or brass is present). If the laser is
bounced back from the mirror and the circuit completes, the machine stops at
the top of the stroke and shows your a message on your tablet. You
determine the height of the laser, you are now more in control of the operation
of your machine. The user-adjustable slider is operated through a
traditional thumb screw.
Constructed from anodized aluminum - Mark
7® Reloading Red
Precision laser with easy adjustments for
different grain bullets and calibers ** Important to note that the precision of a laser is unmatched in this use --
it can even determine the difference between an upside-down bullet form a hollow
point bullet !
Can stop the machine if no bullet present,
upside down bullet, sideways bullet, no brass present and alerts you through
Supports all Revolution® calibers
On-the-fly enable/disable through the tablet
This unit installs in moments with the
included hardware - no modifications to your machine necessary. A
must-have for people that want full protection from running out of bullets
which can ruin your whole reloading session. Covered under the Mark 7®
exclusive no BS warranty. Completely COMPATIBLE with PowderSense® and other Mark 7® genuine accessories.