The Gen 2 Digital Powder Check Sensor can automatically
stops the machine if a grossly incorrect powder level is detected inside the case. If this happens you will then see a notification on the computer tablet to check the case powder
level. A must-have for people that want full confidence that every round
produced has powder. Gen 2 Digital Powder Check Sensor comes complete with
- Small pistol
- Small rifle
- Large pistol
- Large rifle
How it works: The user attaches the probe that corresponds to
the case type and size to the sensor rod. Then adjust the sensing probe assembly
to the correct height for the desired powder load by moving the sensor die up
or down and secure the die. When the press is operating, the probe is automatically inserted into the charged case.
This moves the sensor bar into its measuring position. If the sensor’s infrared laser beam is able
to pass through either the sensor bar’s “over charge” or “under charge” window
then the notification is triggered. Sensitivity
is dependent on powder type and user adjustment.