Evolution™ Individual Parts Machine Conversions

Your Price: $0.00
Back Order.

Choose Options

Please select Evolution® Caliber Conversion Kit
Please select Evolution® Case Feeder Conversion Kits
Please select Evolution® Spare Tool Heads
Please select Evolution® Primer Conversion Kits
Please select Evolution® MBF Bullet Feeder Conversion
Please select Evolution® Spare Tool Head Holder
Evolution™ Spare Tool Head Holder View Detail [+$64.95]

Machine conversions are a great way to maximize your investment.  But it can be complicated to figure out what you need to get as there are so many variables.  Here we try to make this as simple as possible.  The Mark 7 Evolution® machine conversion kits contain the following: 

  • Caliber Conversions Include: shell plate (all models), case feed adapter, case feed ram, case drop tube, powder funnel and upper swage rod
  • Case Feeder Conversions Include: case feeder plate and spring tube assembly
  • Primer Conversions Include: Primer inner tube, prime insert, primer slide and punch
  • MBF Conversions Include: dropper tube, powder funnel (not used usually on the Evolution® loading presses as the machines use their own funnels), bullet feeder collator plate, spring (select models)

NOTE: A complete turnkey conversion system would include a spare powder measure and a spare bullet feeder installed on a spare tool head with dies so that you have complete tool heads ready to be installed at any time.  Alternately you will be moving over the powder measure, dies and bullet feeder over each time you change calibers.

The Evolution modular press design speeds caliber conversion.  The basic steps are to remove the tool head retaining screw and lift the tool head off of the ram.  Then the shell plate nut is spun off, spring clamps removed and the shell plate is lifted off.  This allows easy access to swap out primer components if a primer size change is necessary.  Next the case feed finger is removed.  Simply reverse those steps, installing the required caliber case feed finger, primer components, shell plate and tool head and you’re good to go.  The entire operation will take 10 to 15 minutes.  If a case feed collator or powder funnel conversion is required that would add about 5 minutes to the total caliber conversion time.  Some features include:

·       Shell plates for all common calibers from 380 to .30-06

·       Easy change tool heads

·       Drop-in small and large pistol and rifle case collator plates

·       Caliber specific case feed fingers

·       Small and large primer components  

Whats included:

Primer Conversion Kit - components needed to turn the press from large to small primers or vice versa

Case Conversion Kit - components needed to turn the press from one caliber to another, including case collator plate and shell plate

MBF - Mr Bulletfeeder conversion kit to change your bulletfeeder over to another caliber

These kits will be available in late May, 2018 and we are adding calibers all the time - if you don't see a caliber you are interested in please get in touch with us.