Autodrive to Evolution PRO Conversion kit

Your Price: $0.00
Back Order

Choose Options

Please select option
Hardware kit - converts your Autodrive to an Evolution™ PRO Drive [+$299.95]
Evolution BulletSense Bracket [+$78.99]
Available in May, 2018

If you are a Mark 7® customer with an Autodrive - this conversion kit is for you.  The kit contains everything you need to turn your current Autodrive into an Autodrive for your Evolution.  Once you get the Evolution™ press you will be able to bolt it onto the base of your Autodrive and you will have the equivalent of an Evolution™ driven buy the Autodrive.

Included with the package are the following items:
  • Kevlar reinforced drive belt 
  • Evolution sprockets 
  • Sprocket to press attachment & hardware
  • Evolution software and firmware
  • Stencil template, drill and tap
The process involves laying the stencil on the base of your current Autodrive.  Carefully drill holes with the included drill bit as indicated in the stencil.  Then use the included tap to create the threads in the drilled holes.  Now you have holes that accommodate the base of the Evolution press - simply bolt the press to the base, connect the included hardware and you are ready to go !  Available for your current 1050X/PRO auto drive.

Mark 7® Autodrive Sensor Compatibility Chart
If you have this Autodrive Sensor... is the Evolution™ PRO Compatability... ...and here are the next steps...
Optical Decapping Sensor™ Unfortunately not compatible Send in your sensor and we will apply an $85.00 credit to your new one
SwageSense™ Compatible BUT requires new lower rod Purchase an updated lower swage rod for $36.99 for updated lower rod
PrimerSense® included with Evolution
PowderSense™ There is a brand new sensor !
BulletSense® Compatible BUT requires new bracket Purchase an updated bracket for $78.99
JamSense® Built-in
TorqueSense™ Built-in
Primer Orientation Sensor™ There is a brand new sensor !
Remote Stop Fully Compatible